June, 2010

  I will soon be adding a set of cotton based air filter elements for your tripower.  They are washable, and flow much better than paper.  They are pink in color, much like the K & Ns, but have the same mesh around the outside as the new paper filters I carry.  They are a big savings over the K & Ns as well.

 For those who need a pressure regulator, I am now carrying the one I have been advocating, that sells under names of Mr. Gasket and more recently, "Offenhauser"   They are reasonably priced and perform well for street use.

June 2009

I have the 1/4" Phenolic insulators, as well as the new studs to accommodate them, in from the machine shop.  The work was done well on  CNC machine, so the insulators (spacers) look great.  The studs are 5/16-18 to go into the intake and 5/16-24 up top, as were the factory ones.  They are just long enough to accommodate the exta gasket and the insulator. Kit comes with new choke rod for the 66 tripower. 

 The 59 to 65 tripower with the 1/4" insulator should not need new choke tubes.  Slightly bending the old tubes should not casue any problems.  

Tags: |

( Share this post | Read More)