Shopping Cart Items
You're looking for items filed under a category of 1957 tripower. There are 37 products in this category.
| Image | Description | Price |
|---|---|---|
 | 1957-58 Complete Air Cleaner Set This set is, essentially, three small based air cleaners from the small center carb of the 59 to 65 air cleaners. Show Quality, mirror chrome. Excellent reproduction. Includes ALL parts needed, unlike others. Three bases, three paper elements, three chrome lids, three bottleneck studs, three correct chrome wingnuts, AND three carb to air cleaner gaskets. NO disappointments.... (Read More) | $130.00 |
| 1957-58 air cleaner set Everything you need. These are the reproduction GTO air cleaners, show quality. All bases are smal diameter to fit the 57-58 carbs. Also fits 348 tripowers and Olds J-2 show quality chrome lidsthree paper filtersthree bases in satin blackthree correct bottleneck studsthree correct chrome wingnutsthree carb to air cleaner gaskets... (Read More) | $130.00 |
| 1957-58 end carb throttlebodies A friend of mine and I had these reproduced. Others make them, but we think ours is the best out there. The throttlebody is aluminum, but easily be painted cast gray to duplicate the originals. The throtleblades are brass, and seal very well. We go ahead and use the DAG 213 as GM recommended "back in the day." The sealer will not wash off; it is more or less permanent. I carry front and rear. The front is different in that it has a 1/8" NPT vacuum port for the power brake fitting and line to the power brake assist. Also fit 348 and Olds J-2 end carbs. Guaranteed to satisfy.... (Read More) | $125.00 |
| 1957-1958 Show Quality Air Cleaner Lids and bases These are for set of three show quality chrome air cleaner lids, mirror finish....and three bases, painted Satin Black. These are for set of three small base carbs, for 57 and 58 Pontiac. ALso fits Chevy 348s and Olds J-2. These are the same lids nd used on the GTO starting in 1964.... (Read More) | $109.00 |
| 1/4" Phenolic Insulator kit 1957-58 This kit also fis the popular 348s, and Olds J-2 as well as the Early Pontiacs. If your tripower has three small Rochester carbs, this fits. Kit includes three precision cut insulators, set of 12 studs and new, plated nuts. Studs are made for this application...not a generic piece. Studs have the correct 5/16-18 threads into intake and 5/16-24 up on top. Kit includes 6 gaskets, which you will need. Solves issues with fuel boiling in the bowls, spilling onto the intake, and flooding the motor. See, also, the 1/2" sets available.... (Read More) | $88.00 |
| 1957 Tripower Mechanical Linkage This is a high quality kit to convert from vacuum to mechanical linkage. Jon Havens made these up, after being frustrated with other kits available. Includes all parts necessary to do the conversion.... (Read More) | $66.00 |
| 1957-1958 Carb Rebuild Kits (3) Not three generic kits from the corner auto parts store. I buy the best gaskets, and parts in bulk and put each kit together myself. Not a lot of extra gaskets to wonder about. Top quality Ethanol resistant fuel pumps with the internal spring around the inside of cup. Includes new springs for under the pumps, one piece needle and seat, carb to intake and carb to air cleaner gaskets.... (Read More) | $65.00 |
 | 1957-1965 Electric Choke Conversion This one wire electric choke fits inside your stock Pontiac (or, even a Chevrolet) choke cup. Comes with new screws (3) and plated clips (3). Fits 59 to 65 center carbs. Simple install. Provides choke when blocking the crossover. The internal tube in the manifold is a closed loop, so it is not necessary to block the ends. In this case, you can see the tips of screws used to block the tubes. I did not leave them like this. The tubes had been removed...so I had to block the openings. I ended up grinding down the heads of the screws so they looked more like a rivot.... (Read More) | $40.00 |
| High Flow Air FIlters (set of 3) This new item is a cloth based filter, washable. Advertized to increase air flow. It resembles the popular K & Ns. The screen on the outside is very much like the screen on the new paper filters available through GM dealers. Cloth is pink Perfect replacement for the paper filter element. Very reasonably priced.... (Read More) | $39.50 |
 | 57-58 End Carb Throttleblades This also fits all small base Rochester end carbs, including J-2 Olds, 348s, and early Caddys. Excellent quality. A friend of mine and I had these manufactured here is the USA. This is a precision fit item. Although this is an exact copy of the original, installation in a used throttlebody does not guarantee a perfect result. I include a small qantity of DAG213 which will be required to seal these perfectly. It looks like black paint and is applied to the edges of the throttleblades after installation. Screws included. You need to glass bead all surfaces prior to assembly. If you do not have the equipment available to glass bead the parts, you have another option. I can restore your throttlebodies for you. Usually, I find customers do not need new throttle... (Read More) | $35.00 |
| Fuel inlet threads for end carbs It is not unusual to find the fuel inlet threads on your 1959 to 1966 end carbs worn out. If you see Teflon Tape on the fittings, or if the brass fuel fitting screws all the way in and is not tight, you likely need this service. It requires you to send me the airhorn. The new thread insert is not a Helicoil, but similar. The fuel inlet threads are tapered (1/8" NPT.) I have a special fixture that your airhorn bolts onto. This fixture is secured to my drill press to make sure the new threads are aligned perfectly. The new insert is not visible when lines are installed. It is more of a barrel type insert than the Helicoil. I have never had a problem with them. Price includes insert, machine work and shipping back in the USA... (Read More) | $33.00 |
| Fuel Inlet Threads for center carb 1959 to 1965 It is not unusual to find the fuel inlet threads on your 1959 to 1966 end carbs worn out. If you see Teflon Tape on the fittings, or if the brass fuel fitting screws all the way in and is not tight, you likely need this service. It requires you to send me the airhorn. The new thread insert is not a Helicoil, but similar. The fuel inlet threads are tapered (1/8" NPT.) I have a special fixture that your airhorn bolts onto. This fixture is secured to my drill press to make sure the new threads are aligned perfectly. The new insert is not visible when lines are installed. It is more of a barrel type insert than the Helicoil. I have never had a problem with them. Price includes inert, machine work and shipping back in the USA. ... (Read More) | $33.00 |
 | 1957-1965 Center Carb Throttleshaft Excellent quality, fits perfectly. New brass screws included. The center carb shaft is often worn, resulting in inconsistent idle because of vacuum leaks. New shaft and new arm resolves the problem of a loose arm which is common. Picture is of a 66 center carb shaft. I do have both in stock. As always, satisfaction guaranteed.... (Read More) | $30.00 |
| Carb Gaskets Only New item. Don't need needle and seats or accel pumps? Get all the gaskets you need for all three carbs, including the carb to manifold gaskets and carb to air cleaner gaskets. Top quality. Specify the year of your tripower as you place in cart.... (Read More) | $27.00 |
| Air cleaner lids only These are the reproduction lids with show chrome..mirror finish. They are exact duplicated of the originals. Priced separately. I do usualy have good used lids as well. E-mail me if you are interested in used ones. ... (Read More) | $25.00 |
 | Tripower DVD This DVD is nearly 90 minutes of information on Pontiac tripowers. Starting with Basics, then to Troubleshooting, and Modifications. With today's fuels, larger motors, aftermarket cams and heads, modifications are necessary to get optimum performance. The DVD has and Index so you can "click" on an area and get the information you need. There are 22 areas, most 3-4 minutes. If you can't see the Index in the picture attached to this item, areas are listed below BASICS...Understanding Idle Circuits/Understanding Power Valve Operation/Installing Fuel Lines and Fittings/Setting float levels/Removing Throttleshafts/Sealing Throttlebodies/PCV "F" Fitting/Power Brake Fitting and Line to Booster/Ported vs. Manifold Vacuum/Choke Operation TROUBLESHOOTING....Rough... (Read More) | $25.00 |
| Air cleaner bases only These come in two sizes. The "small" are for the 59 to 65 center carb. The "large" for the 59 to 66 end carbs. The "small" bases also fit all three carbs in the 57 and 58 tripower. When you add item to cart, you can specify the size and number.... (Read More) | $16.00 |
| New, Blackened, Screw and Washer Sets A set of 22 screws...correct slot and head...Blackened..per originals. Many tripowers have screws that have been damaged over the years from careless removal and/or using the wrong size scredrivers. I have received many requests for this item and have resisted selling my stock. Here is the reason...I buy them in lots of 100 to 200 for each size. There are 4 different sizes of screws and they come zinc plated..silver. So, I glass bead each screw, treat them with Phosphoric Acid solution and seal them. Just a lot of work. But, last week I bought a large quatity, hired a friend to help, and we blasted and colored screws all day. Such fun. If noone buys any, I will eventually use them in my restorations. Go ahead, make your tripower proud wit... (Read More) | $15.00 |
| set of air cleaner studs and wingnuts This is a set of three air cleaner studs and three wingnuts. It is a savings over purchasing them separately from the cart. Studs and wingnuts are excellent reproductions. This set if for the reproduction (or original) GTO style air cleaners.... (Read More) | $15.00 |
| Throttleblade Sealer DAG This is the VERY hard to find sealer that GM used "back in the day." I am told there was a Service Bulletin that addressed complaints about rough idle on the tripower cars. The bulletin described how to apply the sealer and directed the mechanic to the parts counter for a small vile of sealer, a small paint brush, and directions. DAG213 does an excellent job,. but will not help badly pitted throttleblades, or badly pitted bores. I use this product on all the end carb throttlebodies I restore. I have seen some criticize this product. Hmmm. Can't understand that. You want a good idle, you need to have the end carb throttleblades sealed the best you can. I still find it on some of the end carbs I restore. I have heard some criticize this produc... (Read More) | $15.00 |
| Carb Stud Set 12 zinc (silver) studs. Correct 5/16-18 into manifold and 5/16-24 for the nuts... (Read More) | $14.00 |
| 1957-58 Passenger side Long Rod and Clips This plated rod runs from front to rear carbs on passenger side. Replace your rusty or bent up rod. Special design for 57 and 58 only.... (Read More) | $12.00 |
| 1957-1958 choke tube This is a correct reproduction of the single steel choke tube that runs from the center carb choke cup to the intake.... (Read More) | $9.00 |
| Jets I carry most of the jets you may need. If you need help choosing jets, e-mail me. Jets are 7.50 per pair. One pair does one carb.... (Read More) | $7.50 |
 | Quality accelerator pumps, center carb 57-65 and all carbs 57 and 58 These are top quality pumps. Most important, they are Ethalnol resistant. If your pumps have a black cup (rubber part,) do not use them. They will only last a few weeks with Ethanol fuel. Additionally, you will note these pumps have the "garter spring" around the inside of the cup to help them last longer. And, they come assembled with a new spring and cap to hold the spring in place. These are the best pumps I can find. I use them in all my restorations.... (Read More) | $7.25 |
