Shopping Cart Items
You're looking for items filed under a category of 1960 Tripower. There are 48 products in this category.
| Image | Description | Price |
|---|---|---|
 | 1959-1963 Complete Air Cleaner Set This is same set as 1964 and 1965 GTO used. If you can't locate a large one-piece air cleaner, don't want to hide your tripower, or just like the look, these are beautiful, show chrome reproductions, mirror chrome. Excellent reproduction. Includes ALL parts needed unlike others. Three bases, three paper elements, three chrome lids, three bottleneck studs, three correct chrome wingnuts, AND three carb to air cleaner gaskets.... (Read More) | $130.00 |
 | 1959-1966 End Carb Throttlebodies These are excellent quality and seal as well or better than what Rochester made. They are not the ones you see by various suppliers for 75. to 99. These are not made in China, but in USA by a quality craftsman. These are aluminum, but I usually paint correct cast gray, if you specify as you place in cart. Specify front or rear. No disappointments. Come with necesssary gaskets.... (Read More) | $125.00 |
| 1959 to 1965 Air Cleaner Lids and bases only. Show quality, mirror chrome set of air cleaner lids and bases only. Bases are Satin black. Exact reproduction of the popular GTO air cleaners. Many prefer these on the full sized cars, as the big air cleaner hides the tripower. If you want complete set with paper filter elements, studs, wignuts, and gaskets, check the cart, as this item is also available. AND...FOR MONTH OF MAY 2010, FREE SHIPPING FOR ENTIRE ORDER IF YOU PURCHASE THIS ITEM.... (Read More) | $99.00 |
 | Carb airhorn front or rear Excellent repro. Held side by side, you cannot tell difference between this and original. Some say the GM is printed upside-down. They are half wrong. OEM airhorns came with the GM logo facing either direction. Perfect fit. Replace your airhorn with broken air cleaner mount, or damaged fuel inlet threads. Or, contact me to repair your old airhorn. You can choose the finish that comes on it ...dull and blotchy See picture..sorry.) By the way, this is how all of them are, from other suppliers as well. They all come from the same source. And the same counry...you guess..starts with a C. Or, I can glass bead the part and leave it natural. Third choice, I can blast it and dye with Eastwood. Most people apply Eastwood incorrectly and it looks awful. Do... (Read More) | $95.00 |
 | 1/4" Phenolic insulators 1959 to 1965 I have been getting e-mails, 2-3 a week, with concerns that carbs are leaking after the motor is shut down. Sometimes the fuel drips into the manifold, resulting in hard starting. Or, if the car sits, it can be hard to start as the floatbowls are empty. Here is what is happening...Today's Ethanol laced fuel boils at 20 or more degrees lower than straight gasoline. After car is shut off, heat from the motor is absorbed into the carburator...a heat sink. Phenolic has a "high coefficient of heat transfer," and is often used in applications as this one to insulate a hot surface from an ajoining piece. This is not a new idea, but I have had these insulators made, with correct studs, in a kit, to fir your tripwoer and look... (Read More) | $88.00 |
| 1959-60 Fuel Line Kit These are steel lines (also sold separately in cart) with the correct reproduction brass block and the three 90 degree fittings that thread into the carburetors. ... (Read More) | $68.00 |
| 1959 -1965 Rebuild Kits (3) Top Quality, better than you can buy elsewhere. I buy best parts in bulk and put together myself. Best accel pumps, Ethanol Resistant. I include new springs for under the accel pumps, and gaskets carb to air cleaner almost never in kits. Includes all checkballs and clips. Don't let price fool you; these are the best out there. Includes upgraded one piece needle and seat, I refer to as checkvalve. Resists sticking. Three kits for three carbs. I am now including three new screws to attach the Bakelite cover to the choke cup, as well as three plated "tabs" to hold on the cover. For a nice finishing touch, check out a new item I have added to the cart; a set of new, blackened screws and washers for the airorns. They are not included with the carb kits, but can be... (Read More) | $65.00 |
 | 1957-1965 Electric Choke Conversion This one wire electric choke fits inside your stock Pontiac (or, even a Chevrolet) choke cup. Comes with new screws (3) and plated clips (3). Fits 59 to 65 center carbs. Simple install. Provides choke when blocking the crossover. The internal tube in the manifold is a closed loop, so it is not necessary to block the ends. In this case, you can see the tips of screws used to block the tubes. I did not leave them like this. The tubes had been removed...so I had to block the openings. I ended up grinding down the heads of the screws so they looked more like a rivot.... (Read More) | $40.00 |
 | 59-66 end carb throttleblades Excellent quality. Several manufactures have attempted this over the years. This is a precision fit item. Although this is an exact copy of the original, installation in a used throttlebody does not guarantee a perfect result. I include a small qantity of DAG213 which will be required to seal these perfectly. It looks like black paint and is applied to the edges of the throttleblades after installation. Screws included. You need to glass bead all surfaces prior to assembly. If you do not have the equipment available to glass bead the parts, you have another option. I can restore your throttlebodies for you. Usually, I find customers do not need new throttleblades when I inspect them. When I restore a pair of end throttlebodies, I charge 110. a pa... (Read More) | $40.00 |
| High Flow Air FIlters (set of 3) This new item is a cloth based filter, washable. Advertized to increase air flow. It resembles the popular K & Ns. The screen on the outside is very much like the screen on the new paper filters available through GM dealers. Cloth is pink Perfect replacement for the paper filter element. Very reasonably priced.... (Read More) | $39.50 |
| Fuel inlet threads for end carbs It is not unusual to find the fuel inlet threads on your 1959 to 1966 end carbs worn out. If you see Teflon Tape on the fittings, or if the brass fuel fitting screws all the way in and is not tight, you likely need this service. It requires you to send me the airhorn. The new thread insert is not a Helicoil, but similar. The fuel inlet threads are tapered (1/8" NPT.) I have a special fixture that your airhorn bolts onto. This fixture is secured to my drill press to make sure the new threads are aligned perfectly. The new insert is not visible when lines are installed. It is more of a barrel type insert than the Helicoil. I have never had a problem with them. Price includes insert, machine work and shipping back in the USA... (Read More) | $33.00 |
| Fuel Inlet Threads for center carb 1959 to 1965 It is not unusual to find the fuel inlet threads on your 1959 to 1966 end carbs worn out. If you see Teflon Tape on the fittings, or if the brass fuel fitting screws all the way in and is not tight, you likely need this service. It requires you to send me the airhorn. The new thread insert is not a Helicoil, but similar. The fuel inlet threads are tapered (1/8" NPT.) I have a special fixture that your airhorn bolts onto. This fixture is secured to my drill press to make sure the new threads are aligned perfectly. The new insert is not visible when lines are installed. It is more of a barrel type insert than the Helicoil. I have never had a problem with them. Price includes inert, machine work and shipping back in the USA. ... (Read More) | $33.00 |
 | 1959-1966 End Carb Throttleshaft Excellent fit, brass, with holes drilled and tapped in each end to accept your used or new levers. Worn shafts lead to vacuum leaks and poor idle quality. Come with new screws to attach the blades and the screws on both ends. Pictures show shaft with new throttleblades for display only. This item is only the shaft. Throttleblades sold separately. As with all my parts, guaranteed to please.... (Read More) | $30.00 |
 | 1957-1965 Center Carb Throttleshaft Excellent quality, fits perfectly. New brass screws included. The center carb shaft is often worn, resulting in inconsistent idle because of vacuum leaks. New shaft and new arm resolves the problem of a loose arm which is common. Picture is of a 66 center carb shaft. I do have both in stock. As always, satisfaction guaranteed.... (Read More) | $30.00 |
 | 1959-1962 fuel lines only Precision bent to fit right without a big fight. These are not same lines you buy from the other guys. These are steel and need to be as the fuel block is suspended on the driver's side. Line with fittings also in shop. If you are not going for the original look, the 64-65 lines fit and work perfectly as carbs are spaced same and fuel inlets in same location. Of course, the new lines are not rusty like in the picture.... (Read More) | $30.00 |
| 1960-1966 Center carb throttle Arm Replaces missing, damaged, or loose arm. Original is attached with peened over shaft. Requires drilling and tapping to attach to original shaft. Mounts easily to repro center shaft. Does not include idle adjustment screw. The 1959 arm is a one year only part. I ofter have a good, used, replated ne in stock. If this is what you need, e-mail me.... (Read More) | $28.50 |
| Carb Gaskets Only New item. Don't need needle and seats or accel pumps? Get all the gaskets you need for all three carbs, including the carb to manifold gaskets and carb to air cleaner gaskets. Top quality. Specify the year of your tripower as you place in cart.... (Read More) | $27.00 |
| Air cleaner lids only These are the reproduction lids with show chrome..mirror finish. They are exact duplicated of the originals. Priced separately. I do usualy have good used lids as well. E-mail me if you are interested in used ones. ... (Read More) | $25.00 |
 | Tripower DVD This DVD is nearly 90 minutes of information on Pontiac tripowers. Starting with Basics, then to Troubleshooting, and Modifications. With today's fuels, larger motors, aftermarket cams and heads, modifications are necessary to get optimum performance. The DVD has and Index so you can "click" on an area and get the information you need. There are 22 areas, most 3-4 minutes. If you can't see the Index in the picture attached to this item, areas are listed below BASICS...Understanding Idle Circuits/Understanding Power Valve Operation/Installing Fuel Lines and Fittings/Setting float levels/Removing Throttleshafts/Sealing Throttlebodies/PCV "F" Fitting/Power Brake Fitting and Line to Booster/Ported vs. Manifold Vacuum/Choke Operation TROUBLESHOOTING....Rough... (Read More) | $25.00 |
 | 1959-1966 Power Brake Fittings and Line to Booster Quality Reproduction with correct spring clamps. Will not work with cars using vacuum secondary linkage as the fitting going into the front carb is different. I do have some of these used fittings (for vacuum linkage cars with power brakes.) E-mail me if this is what you need.... (Read More) | $21.00 |
| Air cleaner bases only These come in two sizes. The "small" are for the 59 to 65 center carb. The "large" for the 59 to 66 end carbs. The "small" bases also fit all three carbs in the 57 and 58 tripower. When you add item to cart, you can specify the size and number.... (Read More) | $16.00 |
| New, Blackened, Screw and Washer Sets A set of 22 screws...correct slot and head...Blackened..per originals. Many tripowers have screws that have been damaged over the years from careless removal and/or using the wrong size scredrivers. I have received many requests for this item and have resisted selling my stock. Here is the reason...I buy them in lots of 100 to 200 for each size. There are 4 different sizes of screws and they come zinc plated..silver. So, I glass bead each screw, treat them with Phosphoric Acid solution and seal them. Just a lot of work. But, last week I bought a large quatity, hired a friend to help, and we blasted and colored screws all day. Such fun. If noone buys any, I will eventually use them in my restorations. Go ahead, make your tripower proud wit... (Read More) | $15.00 |
| set of air cleaner studs and wingnuts This is a set of three air cleaner studs and three wingnuts. It is a savings over purchasing them separately from the cart. Studs and wingnuts are excellent reproductions. This set if for the reproduction (or original) GTO style air cleaners.... (Read More) | $15.00 |
| Throttleblade Sealer DAG This is the VERY hard to find sealer that GM used "back in the day." I am told there was a Service Bulletin that addressed complaints about rough idle on the tripower cars. The bulletin described how to apply the sealer and directed the mechanic to the parts counter for a small vile of sealer, a small paint brush, and directions. DAG213 does an excellent job,. but will not help badly pitted throttleblades, or badly pitted bores. I use this product on all the end carb throttlebodies I restore. I have seen some criticize this product. Hmmm. Can't understand that. You want a good idle, you need to have the end carb throttleblades sealed the best you can. I still find it on some of the end carbs I restore. I have heard some criticize this produc... (Read More) | $15.00 |
| Carb Stud Set 12 zinc (silver) studs. Correct 5/16-18 into manifold and 5/16-24 for the nuts... (Read More) | $14.00 |
