Shopping Cart Items
You're looking for items filed under a category of Choke Related. There are 17 products in this category.
Page 1 of 1
1
| Image | Description | Price |
|---|---|---|
 | 1966 Electric Choke Conversion If you have blocked the runner in the heads, or the crossover and have lost your choke, this may be what you need. I use parts from other early Rochester carbs to mount a choke cup (same as 59 to 65 center carbs) where the pull-off would have mounted. I modify this the cup to accept vacuum from the same source on the throttlebody the 66 pull-off uses. You do not have to remove the 66 choke shaft. This is a bolt-on. All screws, gaskets and parts you need are included. No need to remove carb to install. Electric one wire choke insert is new. E-MAIL ME BEFORE ORDERING AS AVAILABILITY IS LIMITED. Guaranteed. Special thanks to Rich Roeder, for sending me these pitures of the choke set up I built for him!... (Read More) | $125.00 |
 | 1966 Center Choke Conversion kit Everything you need to convert many regular Pontiac 2 bbls from 1959 to 1967 to accept the choke pull-off. If your airhorn (top) does not have the casting flange to mount the choke pull-off (two screws #8) then this is what you need. Slick deal. Not for correct restoration, but not very noticable, either. Requires some mods I can describe. Just need a drill. E-mail me for details. Look at the installation in the picture. This is a 59 to 67 regular 2 bbl airhorn. It has the SS vent strip and the floatbowl vent, as does the correct 66 airhorn. So, this carb looks very much like the correct 66 center carb. This carb is colored with Eastwood, done correctly. I built this carb for a customer who needed a clone 66 center carb.... (Read More) | $65.00 |
 | 1957-1965 Electric Choke Conversion choke cup. Comes with new screws (3) and plated clips (3). Fits 59 to 65 center carbs. Simple install. Provides choke when blocking the crossover. The internal tube in the manifold is a closed loop, so it is not necessary to block the ends. In this case, you can see the tps of screws used to block the tubes. I did not leave them like this. The tubes had been removed...so I had to block the openings. I ended up grinding down the heads of the screws so they looked more like a rivot.... (Read More) | $40.00 |
 | 1966 Choke Stove and Rod This is the silver box that sits on top of the exhaust crossover(on manifold) on the passenger side. It has an internal spring that attaches to a rod. This rod activates the choke. See pics. This choke stove attaches to the manifold with one special bolt and unique lock washer. I carry tthis special bolt and washer in Stainless Steel under another listing.... (Read More) | $37.00 |
 | 1965 internal choke tube This is the tube that is permanently attached to you intake. It is actually a loop, that is heated with exhaust gasses in the crossover. These tubes do rust through occasionally. When this occurs, you get exhaust gasses in the choke cup, causing condensation and deterioration, eventually freezing up the internal pull-off piston Call me if you need help with installation.... (Read More) | $35.00 |
 | 1961 to 1964 internal choke tube The internal choke tubes for the 61 to 64 intake are mounted to the manifold with two bolts. This kit includes the plate with tube (actually a loop) attached. Also includes the special gasket between this plate and the manifold. Gasket also sold separately.... (Read More) | $27.50 |
| 1966 Center Carb Choke Shaft Excellent repro item. Lever on drivers side is attached.... (Read More) | $21.50 |
| 1961 to 1963 Choke Tubes Pair of steel lines from the center carb to the manifold. Some of these setups had a spacer under the carbs. It is a Bakelite type material. Plese specify below if your tripower has the spacers or not as it effects the length of the tubes.... (Read More) | $16.00 |
 | 1964 Choke Tubes Pair of steel lines from center carb to the intake manifold.... (Read More) | $16.00 |
 | 1965 Choke Tubes Pair of steel lines from center carb to intake.... (Read More) | $16.00 |
 | 1966 choke pull-off New white plastic choke diaphram and plated bracket.I also stock the short pull-off rod and the bracket at end of the choke shaft. Let me know if you need either of these.... (Read More) | $14.00 |
| 1957-1958 choke tube This is a correct reproduction of the single steel choke tube that runs from the center carb choke cup to the intake.... (Read More) | $9.00 |
| 1959-1960 Choke Tubes This steel tube runs from the center carb to the manifold.... (Read More) | $9.00 |
 | 66 choke pull-off rod This is the short rod from the choke pull-off diaphram to the lever on the end of the choke shaft.... (Read More) | $5.00 |
| 1961 to 1964 choke plate/manifold gasket This special gasket goes between the intake manifold and internal choke plate. I recommend replacing it when restoring the intake. No sealer is used on this gasket.... (Read More) | $4.00 |
| Throttleblade (Butterfly) Brass Screw Set A must have when removing the throttleblades and choke flap. Set of 14. 12 have Phillips head, unlike originals. The two visible ones for choke flap have slotted head, while quantities last.... (Read More) | $4.00 |
| 1966 Choke Stove Bolt/Washer Attaches choke stove. Phillips head bolt same as original, with special washer, also SS. Factory bolt was steel and rusted with the heat in this area. ... (Read More) | $3.00 |
Page 1 of 1
1
