Shopping Cart Items
You are viewing all the products offered for sale on PontiacTripower.com arranged in price from highest to lowest. There are 123 items available. To narrow down your search, click on the category links in the middle column or use the search tool.Page 1 of 5
12345 Next › Last »
| Image | Description | Price |
|---|---|---|
 | Pair of #77 heads and matching intake Both heads and the tripower intake are dated A305 (Jan 30, 1965) Heads have been pulled apart and mangnfluxed, cleaned and reassembled. Intake blasted and in heat resistant primer. Heads look excellent, nice, smooth combustion chambers, valves sitting high. I would have the heads examined and check to see if they need guides or any new valves. But, they were removed from a running car. E-mail me for details. I will provide my phone number so you can call. I could finish the tripower with a correct set of restored carbs for an additional charge. Actual shipping charged.... (Read More) | $950.00 |
| 1964-1965 Air Cleaner Set Show Quality, mirror chrome. Excellent reproduction. Includes ALL parts needed unlike others. Three bases, three paper elements, three chrome lids, three bottleneck studs, three correct chrome wingnuts, AND three carb to air cleaner gaskets.... (Read More) | $130.00 |
| 1959-1963 Complete Air Cleaner Set This is same set as 1964 and 1965 GTO used. If you can't locate a large one-piece air cleaner, don't want to hide your tripower, or just like the look, these are beautiful, show chrome reproductions, mirror chrome. Excellent reproduction. Includes ALL parts needed unlike others. Three bases, three paper elements, three chrome lids, three bottleneck studs, three correct chrome wingnuts, AND three carb to air cleaner gaskets.... (Read More) | $130.00 |
| 1957-58 Complete Air Cleaner Set This set is, essentially, three small based air cleaners from the small center carb of the 59 to 65 air cleaners. Show Quality, mirror chrome. Excellent reproduction. Includes ALL parts needed, unlike others. Three bases, three paper elements, three chrome lids, three bottleneck studs, three correct chrome wingnuts, AND three carb to air cleaner gaskets. NO disappointments.... (Read More) | $130.00 |
| 1966 complete air cleaner set Kit includes everything you need for the set... show quality chrome lids three paper filters ..AC no longer produces them, but these are the ones GM sells. Black rubber with white paper, as originalsthree bases in satin blackthree correct bottleneck studsthree correct chrome wingnutsthree carb to air cleaner gaskets... (Read More) | $130.00 |
| 1959 to 1965 air cleaner set Complete set with everything you need show quality chrome lidsthree paper filters..white paper with black rubber seals, same as AC that GM no longer carriesthree bases in satin blackthree correct bottleneck studsthree correct chrome wingnutsthree carb to air cleaner gaskets... (Read More) | $130.00 |
| 1957-58 air cleaner set Everything you need. These are the reproduction GTO air cleaners, show quality. All bases are smal diameter to fit the 57-58 carbs. Also fits 348 tripowers and Olds J-2 show quality chrome lidsthree paper filtersthree bases in satin blackthree correct bottleneck studsthree correct chrome wingnutsthree carb to air cleaner gaskets... (Read More) | $130.00 |
 | 1959-1966 End Carb Throttlebodies These are excellent quality and seal as well or better than what Rochester made. They are not the ones you see by various suppliers for 75. to 99. These are not made in China, but in USA by a quality craftsman. These are aluminum, but I usually paint correct cast gray, if you specify as you place in cart. Specify front or rear. No disappointments. Come with necesssary gaskets.... (Read More) | $125.00 |
 | 1966 Electric Choke Conversion If you have blocked the runner in the heads, or the crossover and have lost your choke, this may be what you need. I use parts from other early Rochester carbs to mount a choke cup (same as 59 to 65 center carbs) where the pull-off would have mounted. I modify this the cup to accept vacuum from the same source on the throttlebody the 66 pull-off uses. You do not have to remove the 66 choke shaft. This is a bolt-on. All screws, gaskets and parts you need are included. No need to remove carb to install. Electric one wire choke insert is new. E-MAIL ME BEFORE ORDERING AS AVAILABILITY IS LIMITED. Guaranteed. Special thanks to Rich Roeder, for sending me these pitures of the choke set up I built for him!... (Read More) | $125.00 |
| 1957-58 end carb throttlebodies A friend of mine and I had these reproduced. Others make them, but we think ours is the best out there. The throttlebody is aluminum, but easily be painted cast gray to duplicate the originals. The throtleblades are brass, and seal very well. We go ahead and use the DAG 213 as GM recommended "back in the day." The sealer will not wash off; it is more or less permanent. I carry front and rear. The front is different in that it has a 1/8" NPT vacuum port for the power brake fitting and line to the power brake assist. Also fit 348 and Olds J-2 end carbs. Guaranteed to satisfy.... (Read More) | $125.00 |
| full sized air cleaner lid This is an excellent reproduction with the correct shape as the original. Comes bare metal. When painted, can not tell from original. Firs all big Pontiac air cleaners with one stud protruding fron top. ALso fits 348 air cleaners as well as Olds J2. GM used same top on all of these. If you are unable to paint this item, contact me. I may be able to paint it for you, for an extra charge.... (Read More) | $110.00 |
| 1966 Air Cleaner Lids and Bases Only Three bases, three Show Chrome, Mirror Finish lids, and three carb to air cleaner gaskets. No disappointments.... (Read More) | $109.00 |
| 1957-1958 Show Quality Air Cleaner Lids and bases These are for set of three show quality chrome air cleaner lids, mirror finish....and three bases, painted Satin Black. These are for set of three small base carbs, for 57 and 58 Pontiac. ALso fits Chevy 348s and Olds J-2. These are the same lids nd used on the GTO starting in 1964.... (Read More) | $109.00 |
| 1959 to 1965 Air Cleaner Lids and bases only. Show quality, mirror chrome set of air cleaner lids and bases only. Bases are Satin black. Exact reproduction of the popular GTO air cleaners. Many prefer these on the full sized cars, as the big air cleaner hides the tripower. If you want complete set with paper filter elements, studs, wignuts, and gaskets, check the cart, as this item is also available.... (Read More) | $109.00 |
 | 1/4' Phenolic insulators 1966 I have been getting e-mails, 2-3 a week, with concerns that carbs are leaking after the motor is shut down. Sometimes the fuel drips into the manifold, resulting in hard starting. Or, if the car sits, it can be hard to start as the floatbowls are empty. Here is what is happening...Today's Ethanol laced fuel boils at 20 or more degrees lower than straight gasoline. After car is shut off, heat from the motor is absorbed into the carburator...a heat sink. Phenolic has a "high coefficient of heat transfer," and is often used in applications as this one to insulate a hot surface from an ajoining piece. This is not a new idea, but I have had these insulators made, with correct studs, in a kit, to fir your tripwoer and look nice. ... (Read More) | $98.00 |
| 1/2" Phenolic Insulator Set 1964 I have been getting e-mails, 2-3 a week, with concerns that carbs are leaking after the motor is shut down. Sometimes the fuel drips into the manifold, resulting in hard starting. Or, if the car sits, it can be hard to start as the floatbowls are empty. Here is what is happening...Today's Ethanol laced fuel boils at 20 or more degrees lower than straight gasoline. After car is shut off, heat from the motor is absorbed into the carburator...a heat sink. Phenolic has a "high coefficient of heat transfer," and is often used in applications as this one to insulate a hot surface from an ajoining piece. This is not a new idea, but I have had these insulators made, with correct studs, in a kit, to fir your tripwoer and look nice. ... (Read More) | $98.00 |
| 1/2" Phenolic Insulator Set 1965 I have been getting e-mails, 2-3 a week, with concerns that carbs are leaking after the motor is shut down. Sometimes the fuel drips into the manifold, resulting in hard starting. Or, if the car sits, it can be hard to start as the floatbowls are empty. Here is what is happening...Today's Ethanol laced fuel boils at 20 or more degrees lower than straight gasoline. After car is shut off, heat from the motor is absorbed into the carburator...a heat sink. Phenolic has a "high coefficient of heat transfer," and is often used in applications as this one to insulate a hot surface from an ajoining piece. This is not a new idea, but I have had these insulators made, with correct studs, in a kit, to fir your tripwoer and look nice. ... (Read More) | $98.00 |
| 1/2" Phenolic Insulator Set 1966 I have been getting e-mails, 2-3 a week, with concerns that carbs are leaking after the motor is shut down. Sometimes the fuel drips into the manifold, resulting in hard starting. Or, if the car sits, it can be hard to start as the floatbowls are empty. Here is what is happening...Today's Ethanol laced fuel boils at 20 or more degrees lower than straight gasoline. After car is shut off, heat from the motor is absorbed into the carburator...a heat sink. Phenolic has a "high coefficient of heat transfer," and is often used in applications as this one to insulate a hot surface from an ajoining piece. This is not a new idea, but I have had these insulators made, with correct studs, in a kit, to fir your tripwoer and look nice. ... (Read More) | $98.00 |
 | Carb airhorn front or rear Excellent repro. Held side by side, you cannot tell difference between this and original. Some say the GM is printed upside-down. They are half wrong. OEM airhorns came with the GM logo facing either direction. Perfect fit. Replace your airhorn with broken air cleaner mount, or damaged fuel inlet threads. Or, contact me to repair your old airhorn. You can choose the finish that comes on it ...dull and blotchy See picture..sorry.) By the way, this is how all of them are, from other suppliers as well. They all come from the same source. And the same counry...you guess..starts with a C. Or, I can glass bead the part and leave it natural. Third choice, I can blast it and dye with Eastwood. Most people apply Eastwood incorrectly and it looks awful. Do... (Read More) | $95.00 |
 | 1/4" Phenolic insulators 1959 to 1965 I have been getting e-mails, 2-3 a week, with concerns that carbs are leaking after the motor is shut down. Sometimes the fuel drips into the manifold, resulting in hard starting. Or, if the car sits, it can be hard to start as the floatbowls are empty. Here is what is happening...Today's Ethanol laced fuel boils at 20 or more degrees lower than straight gasoline. After car is shut off, heat from the motor is absorbed into the carburator...a heat sink. Phenolic has a "high coefficient of heat transfer," and is often used in applications as this one to insulate a hot surface from an ajoining piece. This is not a new idea, but I have had these insulators made, with correct studs, in a kit, to fir your tripwoer and look... (Read More) | $88.00 |
| 1/4" Phenolic Insulator kit 1957-58 This kit also fis the popular 348s, and Olds J-2 as well as the Early Pontiacs. If your tripower has three small Rochester carbs, this fits. Kit includes three precision cut insulators, set of 12 studs and new, plated nuts. Studs are made for this application...not a generic piece. Studs have the correct 5/16-18 threads into intake and 5/16-24 up on top. Kit includes 6 gaskets, which you will need. Solves issues with fuel boiling in the bowls, spilling onto the intake, and flooding the motor. See, also, the 1/2" sets available.... (Read More) | $88.00 |
| 1/2" Phenolic Insulator kit 1957-58 This kit also fis the popular 348s, and Olds J-2 as well as the Early Pontiacs. If your tripower has three small Rochester carbs, this fits. Kit includes three precision cut insulators, set of 12 studs and new, plated nuts. Studs are made for this application...not a generic piece. Studs have the correct 5/16-18 threads into intake and 5/16-24 up on top. Kit includes 6 gaskets, which you will need. Solves issues with fuel boiling in the bowls, spilling onto the intake, and flooding the motor. See, also, the 1/4" sets available.... (Read More) | $88.00 |
 | K & N Air Filter Elements Price is for a set of three (3) elements. Just the elements. Note that K & N also sells a complete set with lids and bases for the tripowers. However, the quality of the lids and bases does not compare to the show quality reproduction lids and bases sold on the page. This item is only the three filter elements. These should improve your motors breathing. They are easily cleaned and should never need replacing. They fit perfectly in the original air cleaner bases, like the GTOs had. Same size and shape as the paper elements. I bought these in large quanitiy from distributor which yielded not only a better price structure, but also free shipping (to me.) I am passing these savings to you. Still not cheap at 80., but cheaper t... (Read More) | $82.00 |
| 1959-60 Fuel Line Kit These are steel lines (also sold separately in cart) with the correct reproduction brass block and the three 90 degree fittings that thread into the carburetors. ... (Read More) | $68.00 |
| 1957 Tripower Mechanical Linkage This is a high quality kit to convert from vacuum to mechanical linkage. Jon Havens made these up, after being frustrated with other kits available. Includes all parts necessary to do the conversion.... (Read More) | $66.00 |
Page 1 of 5
12345 Next › Last »
